Intro
ATV
PWS
Combo
Automation
* ATV + PWS
Parametric Test
ÜObjectives
*Learn to control ATV in combination with PWS to perform digital device parametric testing
*
ÜTasks
1.Modify SRAM algorithm
–Create OUTSOFF & OUTSON tdg & add code for setting outs high / low
2.Modify SRAM BASIC program
–Add Radio Buttons for Voh, Vol
pseudo code steps
Open ATV algorithm   
Load algorithm
Open PWS project (minimize)
SMU setup (for force I)
Set command line & Run Alg (Write/ SetOuts)
If (voh) set SMU1 = -.004 amps else SMU1 = .008 amps
Open DATA card Relay
Measure SMU discrete (SMU1V)
Close Relay / Log Results / Turn DUT Off
–
–
*
*